Patterned roller Y-72

Patterned roller Y-72 is made 15 cm or 6 inches in size and is made of compressed plastic or silicone. This roller is special for water-based paints such as acrylic and plastic. The troubles of this product are much less compared to wallpapers. 7-inch patterned roller EG60 is made 18 cm or 7 inches in size and is made of compressed plastic or silicone. These rollers are much cheaper, and you can with this roller at a rate that is much faster than wallpapers. Also, these rollers are available in many different designs in our warehouse.

Items needed:

1. Patterned roller with your desired designs

2. Handle with tank or foam handle

3. color tray (for foam handle)

4. The right color and accessories

5. Plastic or latex gloves

instructions:

• First of all, before starting work, wash the rollers thoroughly and carefully, because there may be particles and dust on it, then wait for it to dry.

• Mix the desired colors and when it is completely diluted, pour it into the paint tray.

• After that, we paint the paint roller a little inside the tray and then transfer the paint to the grooved part of the tray so that the paint reaches the roller completely.

• Move the paint roller back and forth a few times to remove excess paint.

• Be careful that you put a certain amount of paint into the tank roller in proportion to the amount of work

• After you put the paint in the tank, rotate the tank roller a few times to coat the roller with paint.

• Then put the patterned roller in the handle and rotate the tank roller again so that the patterned roller is also coated with paint.

• Move the roller in a zigzag pattern with light pressure to have a uniform coverage.

• Finally, when you are done, immediately wash the roller completely.