Patterned roller Y-78
Patterned roller Y-103 is made 15 cm or 6 inches in size and is made of compressed plastic or silicone. This roller is special for water-based paints such as acrylic and plastic. The troubles of this product are much less compared to wallpapers. 7-inch patterned roller EG60 is made 18 cm or 7 inches in size and is made of compressed plastic or silicone. These rollers are much cheaper, and you can with this roller at a rate that is much faster than wallpapers. Also, these rollers are available in many different designs in our warehouse.
Items needed:
-
Patterned roller with your desired designs
-
Handle with tank or foam handle
-
color tray (for foam handle)
-
The right color and accessories
-
Plastic or latex gloves
instructions:
-
First of all, before starting work, wash the rollers thoroughly and carefully, because there may be particles and dust on it, then wait for it to dry.
-
Mix the desired colors and when it is completely diluted, pour it into the paint tray.
-
After that, we paint the paint roller a little inside the tray and then transfer the paint to the grooved part of the tray so that the paint reaches the roller completely.
-
Move the paint roller back and forth a few times to remove excess paint.
-
Be careful that you put a certain amount of paint into the tank roller in proportion to the amount of work
-
After you put the paint in the tank, rotate the tank roller a few times to coat the roller with paint.
-
Then put the patterned roller in the handle and rotate the tank roller again so that the patterned roller is also coated with paint.
-
Move the roller in a zigzag pattern with light pressure to have a uniform coverage.
-
Finally, when you are done, immediately wash the roller completely.